Laser Welding Machine, PE-W1500A/PE-W1500B

Laser Welding Machine,PE-W1500A
PE-W1500A
Laser Welding Machine,PE-W1500B
PE-W1500B

The laser welding machine for solar cells is an automatic crystalline silicon solar cell laminated piece string welding machine that comes with a combination of equipment. The capacity of both models reaches up to 1600 solar cells per hour. The solar cell machine combines high quality welding equipment and automated lamination equipment, giving the machine a full performance range in order to ensure the production quality. With a 24 hour continuous working process, and a breakage rate of less than 0.2%, this machine is an excellent choice.

Solar String Welder Performance
The solar string welder has a no pressure, hot air welding wheel, servo motor drives, and an industrial camera orientation detection in order to automatically remove damaged cells. Users do need to set the cell spacing, the number of single-string cells, and the soldering temperature. The equipment is simple and easy to operate, and is suitable for welding multiple sheets of crystalline silicon solar cells.

The solar string welder also has a semi-automatic and fully automatic welding lamination photovoltaic string docking device, allowing for a battery string layout and positioning on the glass.

Technical Parameters
Model PE-W1500A PE-W1500B
Power Requirements 400V 3P+N+G 400V 3P+N+G
The min power consumption 20KW 26KW
Frequency 50 - 60HZ 50 - 60HZ
Temperature range 15 to 50°C 15 to 50°C
Specifications 3900 × 2650 × 1800mm 6500 × 3500 × 2000mm
The weight 1500kg 2900kg
Compressed air 6 Bar 6 Bar
Feedback Form
Other Products
  • Laser Welding Machine, PE-W800 1. The solar string welding machine can be used on BIPV modules
    2. It is equipped with a double sided welding battery
    3. The machine also features patented welding technology.
    4. Solar cells can be welded at 5 or 6 inches, as well as half slices.
  • Laser Welding Machine, PE-W700-AThe PE-W700-A laser welding machine is used for electrical isolation and hermetic sealing of modules. It is also used for the complete removal of every layer from the edge of fully processes thin film solar cells on glass substrates when required. The laser edge deletion technology provides a better performance over traditional techniques, like sand blasting and grinding.
  • Laser Welding Machine, PE-W700-BLaser Dielectric Ablation is the application of advanced metallization schemes in order to reduce shadow losses and series resistance losses. It is also done to improve contact to the emitter.